Troubleshooting the Netgear Orbi CBR750 blue light issue has snatched the living daylights of a number of Orbi users out there. Are you also not able to stop the LED light on your Netgear Orbi device from blinking blue despite achieving Netgear Orbi CBR750 setup success?
Well, in that case, you have landed on the right post. Here, we have given the topmost reasons behind this issue along with the solutions through which you can get rid of it permanently. So, continue reading this article.
[Reasons] Netgear Orbi CBR750 Flashing Blue Light
Highlighted in this section are the topmost reasons why the LED on your Netgear Orbi CBR750 is adamant about not stopping from blinking blue:
- The connection between the Netgear Orbi devices is weak.
- You have not placed your Orbi CBR750 at the right location.
- Technical glitches can also force the Orbi to blink blue in color.
- The Orbi router is loosely connected to the existing modem.
- Your Orbi CBR750 is functioning on an outdated firmware version.
Now that you have fed your brain with enough knowledge regarding what might have caused the issue at hand, you ought to walk through the hacks mentioned in the following section to troubleshoot it once and for all.
[Resolved] Netgear Orbi CBR750 Blue Light Issue
- Power Cycle the Orbi Device
As mentioned earlier, the number one reason why you are experiencing the blue light issue with your Netgear Orbi CBR750 router is because of technical glitches. To get rid of them, you just need to power cycle your networking device. You can do so by turning it off and on.
Once done, see if the issue at hand has said goodbye to you. On the off chance, you are still experiencing it; it is recommended that you walk through the next troubleshooting hack. Who knows it might work in your favor.
- Sync the Orbi Devices Again
The dropping of connection between the Netgear Orbi router and the satellite is quite normal. After all, no technical device can work perfectly, right? Taking this into consideration, it is recommended that you re-sync your Orbi devices.
Do you know how you can do so? Well, first press the Sync button on the Netgear Orbi router, and then, do the same with the satellite. Soon, you will find yourself out of the mess that you are currently in. On the off chance, that does not happen, then continue reading.
- Change the Orbi Location
A bad location can ruin the performance of any technical device, not just your Netgear Orbi. Check where the Orbi CBR750 is placed. Is its location sharing space with metal objects, transmitting appliances, electronic devices, and reflexive surfaces?
If that is a yes, then you ought to relocate your Orbi CBR750 wireless router. You can do so by unplugging your device from its existing wall socket, and then plugging it into the one that is not located in a room filled with the aforementioned things.
- Tighten the Cable Connection
Have you used a damaged Ethernet cable for the establishment of the connection between the networking devices? Well then, you were bound to experience the Netgear Orbi CBR750 blue light issue because of a loose Ethernet cable connection.
Therefore, you need to tighten the cable connection to troubleshoot the issue at hand. You can do so by replacing the Ethernet cable with which the networking devices are connected with a non-damaged one. You can use a brand-new cable if you want.
- Do Orbi Firmware Upgrade
You can also try to upgrade the firmware of your Netgear Orbi router via orbilogin.net to stop the LED on it from blinking blue any further. Now, the question arises, how to update the firmware of Orbi to the latest version?
Well, you will find the answer to that question in the user manual which you found with your Orbi device while unwrapping it. If you ever want to become certain about any detail of your device, then you can do so by referring to the manual.
In Conclusion
After walking through the above-mentioned troubleshooting hacks, we are being hopeful that you will be able to resolve the Netgear Orbi CBR750 blue light issue. On the off chance, you are experiencing the same, resetting your networking device is the best solution.
Was this article worth your time? Would you like to share your answer? Share it via the comment section. Apart from us, your fellow readers will read it. Also, if you are aware of any other hack through which the same issue can be fixed, do tell.
